Gas Powered Salt Spreader Universal Wireless Remote Controller
$529.99
Replace your OEM salt spreader controller with a wireless controller transmitter with this GASSPREADER kit. Convert your salt sand gas spreader to a wireless spreader in minutes. Replaces Meyer Part # 66190 wireless spreader controller as well as Swenson Wireless Gas Spreader controllers or any other gas powered spreader with an OEM wired controller. Wireless transmitter designed for gas engine driven de-icing equipment salt sanders. Can also be used on other engine remote control needs like start stop throttle up and throttle down spinner conveyor on and off. Transmitter has a rubber boot and lanyard with a glow in the dark label. Once installed, the wireless transmitter controls the salt spreader on and off, engine start and stop, throttle up and down. This unit is a very cost effective way to replace or convert equipment to wireless technology No more bulky, costly controls and wiring or corroded connections caused by salt damage. This unit will work with any engine driven salt sander such as Western, Henderson, Swenson, Meyer, Salt Dogg, Buyers, Downeaster, Snow-Ex, Boss.Unit has many other applications where the functions above can be applied to various applications Works with 12 DC Voltage.
IF THIS PRODUCT IS OUT OF STOCK, YOU CAN USE THE GAS SPREADER PLUS WIRELESS CONTROLLER AS WELL. You just wouldn’t use the extra functions if not needed.
- Description
- Additional information
- Reviews (0)
Description
Gas Engine Spreader Wireless Remote Control Conversion Kit
Gas Engine Powered Salt Sand Spreader Wireless Controller – Universal Wireless Controller. Replace Your OEM Controller with Wireless.
Part #GASSPREADER is a wireless receiver and wireless transmitter which converts your single gas engine motor powered salt / sand spreader such as the Western Salt spreaders, Meyer Spreaders as well as their Meyer #66190 wireless remote control kit , Swenson Spreaders as well as their Swenson gas spreader control kit, or any other single gas motor salt spreader on the market today. Convert easily and use a wireless remote controller that can control all of your existing functions like engine start, stop. Throttle up and down. Clutch engage and disengage from up to 100 ft away. Easily wire up an 8 gauge power/ground to the back of your truck and plug in with Anderson Plug Quick Disconnects. Even at this price, it’s still cheaper than OEM new wiring and controller, which can cost upwards of $800 for all new parts. That means after you buy our universal salt spreader wireless controller, you can sell your old OEM control box, controller wiring, and control mount and never look back. The wireless controller replaces all of your existing functions including variable speed control. Works up to 500′ away.
- Operational range of up to 500 feet from wireless transmitter to wireless receiver.
- Weather potted to protect the wireless receiver in any harsh weather conditions including extreme cold, rain, sleet, snow and ice.
- Instant wireless receiver activation to wireless DC receiver.
- 1 in 16 million address combinations ensure you can have many wireless transmitters added to each receiver if needed.
- Up to twenty wireless transmitters can be paired to a single receiver.
- Wholesale discounts available.
- Used commonly on single gas Salt Spreaders like the Western, Boss, Swenson, Meyer, Downeaster, Hiniker, or any other large brand on the market today.
GAS Salt Spreader Universal Wireless Transmitter Controller
Buy this GASSPREADER and quickly benefit your company with wireless controllers on your salt spreaders. Buy a few more power and ground wiring kits to help you move your single gas motor Tailgate Salt Spreader from truck to truck throughout the night as needed if a truck goes down or a simple shift change without the need to wire up different trucks with hundreds of dollars in wires and cables, not to mention oem wired controllers themselves. This wireless controller and wireless receiver can take a beating and have been tested in the harshest Minnesota Winter weather and can be used anywhere including in ice, snow, sleet, rain or severe cold.
Wireless gas powered salt spreader controllers work perfectly on gas spreaders from Western, Hiniker, Swenson, Meyer, Boss, Fisher, SaltDogg or Hiniker salt spreaders or any other gas motor spreader models on the market today. You will save you money, time, and overall efficiency as soon as you make the switch. The wireless controller saves you from hard-wiring a controller and all of its wiring harnesses, approx $800 for the oem wiring and controller and allows you to transfer the unit easily to other trucks that are setup with the needed power and ground cables. We carry a wide variety of wireless controls for the snow industry and hundreds of other dc applications. Built by us in America. All of our controllers are industrial use controllers.
The Universal Gas Motor Salt Spreader Wireless Controller Transmitter/Receiver Contains the Following:
- (1) GASSPREADER Receiver
- (1) GASSPREADER Transmitter with label , boot and lanyard
- (1) relay
Gas Spreaders – Salt Spreader Universal Wireless Transmitter Controller
The GASSPREADER Wireless gas Motor Salt Spreader Controller provides throttle up, down, engine start , stop and spinner / conveyor start and stop. GASSPREADER has built-in safety circuits.
Additional information
| Weight | 5 lbs |
|---|---|
| Dimensions | 10 × 10 × 6 in |
| Motor Type | Gas Motor |
| Auxillary Option | No Vibrate (Run Wire For Switch if Needed) |
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.